2020 Subaru Outback Recall: Power Train (NHTSA 21V955000)

NHTSA (the National Highway Traffic Safety Administration) issued a recall affecting 2020 Subaru Outback vehicles manufactured by Subaru of America, Inc.. Below is the official summary, the risk involved, and the fix available at no cost.

Table of contents
  1. What does the official notice say?
  2. Risk if left unaddressed
  3. Manufacturer's fix (remedy)
  4. Additional notes
  5. How to check if your vehicle is affected
  6. Frequently asked questions

What does the official notice say?

Subaru of America, Inc. (Subaru) is recalling certain 2019-2020 Ascent, 2020 Legacy and Outback vehicles. A programming error in the Transmission Control Unit (TCU) may allow the clutch to engage before the drive chain is completely clamped.

Risk if left unaddressed

An improperly secured drive chain may slip and break, causing a loss of drive power and increasing the risk of a crash.

Manufacturer's fix (remedy)

Dealers will reprogram the TCU, inspect TCU data for chain slip, and visually inspect the chain guide. If evidence of chain slippage or damage is found, the transmission will be replaced. Repairs will be performed free of charge. Owner notification letters were mailed August 19, 2022. This recall includes all vehicles previously recalled under 19V-855. Vehicles previously recalled under 19V-855 will need to have the new remedy performed for this recall once available. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRK-21.

Additional notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

How to check if your vehicle is affected

Enter your Vehicle Identification Number (VIN) in the official NHTSA lookup tool at nhtsa.gov/recalls to confirm whether your specific vehicle is included in this campaign (number 21V955000).

Frequently asked questions

What is NHTSA recall 21V955000?

Subaru of America, Inc. (Subaru) is recalling certain 2019-2020 Ascent, 2020 Legacy and Outback vehicles. A programming error in the Transmission Control Unit (TCU) may allow the clutch to engage before the drive chain is completely clamped.

What happens if this recall isn't fixed?

An improperly secured drive chain may slip and break, causing a loss of drive power and increasing the risk of a crash.

Is the repair free, and how do I check my VIN?

Dealers will reprogram the TCU, inspect TCU data for chain slip, and visually inspect the chain guide. If evidence of chain slippage or damage is found, the transmission will be replaced. Repairs will be performed free of charge. Owner notification letters were mailed August 19, 2022. This recall includes all vehicles previously recalled under 19V-855. Vehicles previously recalled under 19V-855 will need to have the new remedy performed for this recall once available. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WRK-21. Enter your Vehicle Identification Number (VIN) at nhtsa.gov/recalls to confirm whether your specific vehicle is included in campaign 21V955000.

Source: public NHTSA data, campaign 21V955000, reported on 09/12/2021. This content is for informational purposes only, does not constitute legal advice, and was compiled from official data with editorial review prior to publication.

Recall Radar

Recall Radar is the editorial team behind RecallRadar, tracking official NHTSA vehicle recalls and translating them into clear, practical guidance — what's affected, what's the risk, and how to get the free fix. Every post is compiled from public NHTSA data and reviewed before publishing.

Go up